2014年3月12日星期三

Motorola Solutions MSC-122 echte fragen

Wir Pass4Test sind die professionellen Anbieter der IT-Zertifizierungsunterlagen. Seit langem betrachten wir Pass4Test das Angebot der besten Prüfungsunterlagen als unser Ziel. Verglichen zu anderen Webseiten, wir Pass4Test sind immer von anderen vertraut. Warum? Weil wir Pass4Test vieljährige Erfahrungen haben, aufmerksam auf die IT-Zertifizierung-Studie machen und viele Prüfungsregeln sammeln. Damit können wir Pass4Test sehr hohe Hit-Rate haben. Das gewährleistet die Durchlaufrate.

Die Schwierigkeiten können den Charakter eines Menschen testen. Eine schlechte Situation kann die Aufrichtigkeit eines Menschen zeigen. Wenn man einer schlechten Situation gegenüberstehen, können nur die mutigen es gant leichtnehmen. Sind Sie ein mutiger Mensch?Wenn Sie sich nicht so gut auf Ihre Prüfung vorbereiten, können Sie es noch leichtnehmen. Sicher. Weil Sie die Schulungsunterlagen zur Motorola Solutions MSC-122-Prüfung von Pass4Test haben. Und eine Prüfung wird Sie nicht niederschlagen.

Wenn Sie die Fragen und Antworten zur Motorola Solutions MSC-122-Prüfung von Pass4Test kaufen, können Sie ihre wichtige Vorbereitung im leben treffen und die Schulungsunterlagen von guter Qualität bekommen. Kaufen Sie unsere Produkte heute, dann öffnen Sie sich eine Tür, um eine bessere Zukunft zu haben. Sie können auch mit weniger Mühe den großen Erfolg erzielen.

Exam Code: MSC-122
Prüfungsname: Deploy WLAN Solutions
Aktulisiert: 2014-03-12
Nummer: 113 Q&As

Wenn Sie Ihre Position in der konkurrenzfähigen Gesellschaft durch die Motorola Solutions MSC-122 Zertifizierungsprüfung festigen und Ihre fachliche Fähigkeiten verbessern wollen, müssen Sie gute Fachkenntnisse besitzen und sich viel Mühe für die Prüfung geben. Aber es ist nicht so einfach, die Motorola Solutions MSC-122 Zertifizierungsprüfung zu bestehen. Vielleicht durch die Motorola Solutions MSC-122 Zertifizierungsprüfung können Sie Ihnen der IT-Branche vorstellen. Aber man braucht nicht unbedingt viel Zeit und Energie, die Fachkenntnisse kennen zu lernen. Sie können die Schulungsunterlagen zur Motorola Solutions MSC-122 Zertifizierungsprüfung von Pass4Test wählen. Sie werden zielgerichtet nach den IT-Zertifizierungsprüfungen entwickelt. Mit ihr können Sie mühelos die schwierige Motorola Solutions MSC-122 Zertifizierungsprüfung bestehen.

Unser Pass4Test ist eine Website, die eine lange Geschichte hinter sich hat und die Schulungsunterlagen zur Motorola Solutions MSC-122 Zertifizierungsprüfung von Pass4Test bietet. So genießt Pass4Test einen guten Ruf in der IT-Branche. Und wir haben vielen Kandidaten geholfen, die Prüfung zu bestehen. Die Fragen und Antworten zur Motorola Solutions MSC-122 Zertifizierungsprüfung von Pass4Test werden von den erfahrungsreichen Expertenteams nach ihren Kenntnissen und Erfahrungen bearbeitet. Wenn Sie an der Motorola Solutions MSC-122 Zertifizierungsprüfung teilnehmen wollen, ist Pass4Test zweifellos eine gute Wahl.

MSC-122 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/MSC-122.html

NO.1 During a recent throughput analysis test of your 802.11g network, you discovered that performance is
poor in comparison to previous baselines. You discover that this is the result of 802.11b stations becoming
associated with your access point. What option could you implement to eliminate 802.lib clients from
attaching to your network?
A. Implement protection mechanisms
B. Make 24 mbps a required data rate
C. Implement RTS/CTS at the access point
D. Change the channel used for the network
Answer: B

Motorola Solutions dumps   MSC-122   MSC-122

NO.2 You have an access point that requires PoE connected to a switch with a 150 meter 10 BASE-T CAT 5
cable. During testing numerous problems with both data transmission and intermittent power occurs.
Which of the following is most likely the cause?
A. The cable should be CAT 6
B. There is a duplex mismatch
C. The cable should be 100 BASE-T
D. The cable is too long
Answer: D

Motorola Solutions dumps   MSC-122   MSC-122   MSC-122 zertifizierungsantworten   MSC-122 testantworten

NO.3 You are designing a WLAN that will support multiple BSS IDs. One of the characteristics you need to
take into consideration is that each BSS transmits a beacon every 100 ms. How many BSSs can be
enabled on the following Motorola access points under WiNG 5: AP7131, AP650, AP6532?
A. 2, one per radio
B. 1 per AP, it is shared between the radios to provide seamless roaming
C. 8, four per radio
D. 16, eight per radio
Answer: D

Motorola Solutions prüfungsunterlagen   MSC-122   MSC-122   MSC-122 testantworten   MSC-122 dumps

NO.4 If a Motorola access point induces a 50 mW RF signal onto a 3 dBi antenna, what will be the resulting
EIRP of the transmitted signal?
A. 0 dBm
B. 3 dBm
C. 20 dBm
D. 50 mW
E. 50 dBm
Answer: C

Motorola Solutions   MSC-122   MSC-122

NO.5 You have configured a Motorola RFS controller using WiNG 5 and have attempted to adopt a group of
APs using L2 adoption but the adoption is not successful. You have confirmed the following:
-All of the APs have an Ethernet connection to the same LAN segment as the controller -Spanning Tree
Protocol (STP) has been disabled on the APs next hop switch port -Intermediate firewalls are not blocking
EtherType 0x8783
Given this scenario, which of the following is the most likely cause of the unsuccessful AP adoption?
A. DHCP option 192 has not been defined on the DHCP server
B. A local VLAN has been configured on both the controller and the APs
C. The APs GE ports have been configured for an S02.1q-tagged native VLAN
D. The APs GE ports have been configured for an 802.1q-untagged native VLAN
Answer: C

Motorola Solutions   MSC-122 prüfungsunterlagen   MSC-122

NO.6 Your customer has requested that you configure unique VLANs for voice, normal user data with
802.1X security, guest access, and management traffic. Which of the following VLAN modes can support
this request?
A. Native Mode
B. Access Mode
C. Trunk Mode
D. Aggregation Mode
E. Encapsulation Mode
Answer: C

Motorola Solutions testantworten   MSC-122   MSC-122 dumps

NO.7 You are deploying a new WLAN within the WiNG 5 architecture. Which of the following is the only
UNSUPPORTED Motorola access point/port?
A. AP-300
B. AP-650
C. AP-5131
D. AP-7131
Answer: C

Motorola Solutions prüfung   MSC-122 zertifizierungsfragen   MSC-122 antworten

NO.8 You have just conducted a throughput test using iPerf on a WLAN that shows a PHY signaling rate of 54
Mbps, however the average throughput rate shown in iPerf is only 23.5 Mbps. What is the most likely
explanation for this condition?
A. This throughput speed is considered nominal.
B. This throughput rate could indicate a mismatch between Wi-Fi confidentiality algorithms.
C. This throughput rate indicates excessive user activity.
D. This throughput rate indicates excessive out-of-band interference such as nearby cell phone towers.
Answer: A

Motorola Solutions antworten   MSC-122   MSC-122 prüfung   MSC-122   MSC-122 originale fragen

NO.9 Which of the following is the primary method of collision avoidance in an 802.11 CSMA/CA WLAN?
A. Backoff Timer
B. Carrier Sense
C. Contention Window
D. Enhanced Distributed Channel Access (EDCA)
E. Distributed Coordination Function Interframe Spaces (DIFS)
Answer: B

Motorola Solutions prüfungsfragen   MSC-122   MSC-122 originale fragen

NO.10 You are performing a physical site survey of a new WiNG 5 WLAN deployment. Which of the following is
CORRECT?
A. The Signal to Noise Ratio (SNR) is a critical measurement that needs to be addressed.
B. It is acceptable that you use any RF infrastructure device (Access Point) to perform the site survey test.
C. Using default settings of a site survey application will provide an adequate site survey result.
D. Customer throughput requirements are the only criteria for which need to be surveyed.
Answer: B

Motorola Solutions originale fragen   MSC-122   MSC-122   MSC-122   MSC-122 echte fragen

NO.11 Which of the following APs does not support adaptive mode?
A. AP7131
B. AP6532
C. AP650
D. AP6521
Answer: A

Motorola Solutions zertifizierungsantworten   MSC-122 echte fragen   MSC-122 exam fragen

NO.12 Which of the following statements is NOT considered to be a best practice with respect to the wired
backbone serving the WLAN.?
A. When performing manual configuration of a point-to-point Ethernet link, ensure that both the speed and
the duplex mode settings on the two ports match.
B. When creating a link between Ethernet 10/100BASE-T or 10/100/1000BASE-T ports, enable (or accept
the default of) auto-negotiation on both ports.
C. When creating a link between Gigabit Ethernet fiber ports, enable (or accept the default of)
auto-negotiation.
D. When creating a link between Gigabit Ethernet fiber ports, disable auto-negotiation on both ports.
Answer: D

Motorola Solutions   MSC-122 testantworten   MSC-122   MSC-122   MSC-122 zertifizierungsfragen

NO.13 Which of the following statements regarding the configuration of Motorola RFS controllers is TRUE?
A. ADSP can be used to push CLI profiles to APs and controllers.
B. LANPlanner can be used to push CLI profiles to APs and controllers.
C. RFMS can be used to perform predictive site surveys using an RFS controller
D. WiNG 5 can be used to perform manual site surveys using an RFs controller
E. CLI can be used to perform both manual and predictive site surveys using an RFS controller.
Answer: A

Motorola Solutions   MSC-122 testantworten   MSC-122

NO.14 You are deploying a new system and are creating the RF Domain(s). Which of the following options
would you use to group the APs into the same domain?
A. By VLAN, where all APs are on the same subnet.
B. By site, which can be a location where the group of installed APs can hear each other's beacons.
C. By name, so they can be easily sorted in the tree view of the controller.
D. By deployment phase, so configurations can be accidentally pushed to newly installed APs.
Answer: A

Motorola Solutions originale fragen   MSC-122   MSC-122 prüfungsunterlagen   MSC-122 dumps   MSC-122

NO.15 Your customer has requested that during the upcoming 802.llg to 802.11n upgrade deployment you
enable 40 MHz channels on 1, 6, and 11 of the 2.4 GHz ISM band. You respond by saying that there is not
enough spectrum to allow 40 MHz channels centered on 1, 6, and 11. How wide are standard 802.11g
(OFDM) channels?
A. 20 MHz
B. 83.5 MHz
C. 5 MHz
D. 11 MHz
E. 22 MHz
Answer: A

Motorola Solutions prüfungsfrage   MSC-122 zertifizierungsfragen   MSC-122   MSC-122

Pass4Test bietet Ihnen die neusten MB6-871 exam Unterlagen und HP2-N40 pdf Fragen & Antworten mit hoher Qualität. Unser CUR-009 zertifizierung und HIO-201 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative 1Z0-821 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.

Artikel Link: http://www.pass4test.de/MSC-122.html

没有评论:

发表评论