Wir sollen im Leben nicht immer etwas von anderen fordern, wir sollen hingegen so denken, was ich für andere tun kann. In der Arbeit können Sie große Gewinne für den Boss bringen, legt der Boss natürlich großen Wert auf Ihre Position sowie Gehalt. Wenn wir ein kleiner Angestellte sind, werden wir sicher eines Tages ausrangiert. Wir sollen uns bemühen, die Zertifizierung zu bekommen und Schritt für Schritt nach oben gehen. Die Fragen und Antworten zur Juniper JN0-522-Prüfung von Pass4Test helfen Ihnen, den Erfolg durch eine Abkürzung zu erlangen. Viele IT-Fachleute haben die Schulungsunterlagen zur Juniper JN0-522-Prüfung von Pass4Test gewählt.
Wir bemühen uns nun darum, den Kandidaten den schnellen und effizieten Service zu bieten, um Ihre wertvolle Zeit zu ersparen. Pass4Test bietet Ihnen zahlreiche Lerntipps, Fragen und Antworten zur Juniper JN0-522 Zertifizierungsprüfung. Einige Websites bieten Ihnen auch Lernmaterialien zur JN0-522 Zertifizierungsprüfung, die von guter Qualität ist und mit dem Zeit Schritt halten. Aber Pass4Test ist die einzige Website, die beste Schulungsunterlagen zur JN0-522 Zertifizierungsprüfung bieten. Mit der Hilfe von Lernmaterialien und der Anleitung von Pass4Test können Sie nur einmal die Juniper JN0-522 Zertifizierungsprüfung bestehen.
Exam Code: JN0-522
Prüfungsname: FXV,Associate (JNCIA-FWV)
Aktulisiert: 2014-03-02
Nummer: 160 Q&As
Wenn Sie Juniper JN0-522 Zertifizierungsprüfung ablegen, ist es nötig für Sie, die richtigen Juniper JN0-522 Prüfungsunterlagen zu benutzen. Wenn Sie irgendwo die Unterlagen suchen, stoppen Sie jetzt bitte. Wenn Sie keine richtigen Unterlagen haben, probieren Sie bitte Juniper JN0-522 dumps von Pass4Test. Die Hitrate der dumps ist so hoch, dass sie Ihnen den einmaligen Erfolg garantieren. Verglichen zu anderen Prüfungsunterlagen können diese dumps die Prüfungsinhalte ganz richtig greifen. Damit können Sie Ihre Lerneffektivität erhöhen und sich besser auf Juniper JN0-522 Zertifizierungsprüfung vorbereiten.
Wenn Sie sich an der Juniper JN0-522 Zertifizierungsprüfung beteiligen, wählen Sie doch Pass4Test, was Erfolg bedeutet. Viel glück!
Wenn Sie immer noch viel wertvolle Zeit und Energie für die Vorbereitung der Juniper JN0-522 Zertifizierungsprüfung benutzen und dabei nicht wissen, wie man einfach und effizient die Juniper JN0-522 Zertifizierungsprüfung bestehen kann, bieten jetzt Pass4Test Ihnen eine effektive Methode, um die Juniper JN0-522 Zertifizierungsprüfung zu bestehen. Mit Pass4Test würden Sie bessere Resultate bei weniger Einsatz erzielen.
JN0-522 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/jn0-522.html
NO.1 Which ScreenOS CLI command is required to enable a policy during specified times, days, or dates?
A.set time
B.set clock
C.set calendar
D.set scheduler
Answer:D
Juniper originale fragen JN0-522 JN0-522 zertifizierungsantworten JN0-522 zertifizierungsfragen
NO.2 Which statement is correct about tunnel interfaces?
A.They can have overlapping IP addresses.
B.They need to be configured in the zone where the protected resources reside.
C.They can be unnumbered and used in policy-based translations if the interface is in route mode.
D.They can be unnumbered from any interface residing on the same virtual router as the protected
resources.
Answer:D
Juniper JN0-522 zertifizierungsantworten JN0-522 JN0-522 prüfungsfragen
NO.3 Which command can you use to view the log of IKE negotiations and results?
A.get event type 536
B.get ike cookie
C.get sa active
D.debug ike basic
Answer:A
Juniper echte fragen JN0-522 zertifizierungsantworten JN0-522 antworten JN0-522 JN0-522 exam fragen
NO.4 What needs to be configured in Phase 2 of a route-based VPN, that does not need to be configured in a
policy-based VPN?
A.proxy-id
B.tunnel-binding
C.transport mode
D.custom proposals
Answer:B
Juniper JN0-522 JN0-522 JN0-522 echte fragen
NO.5 You want to minimize the number of IP addresses, subnets, and policies in use. How should you
configure your tunnel interface?
A.Configure the tunnel interface with an IP address with a 32 bit subnet mask.
B.Configure the tunnel interface with an IP address with a 30 bit subnet mask.
C.Configure the tunnel interface as unnumbered and place the interface in the same zone as the
designated interface.
D.Configure the tunnel interface as unnumbered, but place the tunnel interface in a different zone than the
designated interface.
Answer:C
Juniper antworten JN0-522 JN0-522
NO.6 Which ScreenOS CLI command would be used to view traffic logs?
A.get traffic
B.get log policy
C.get policy log
D.get log traffic
Answer:D
Juniper JN0-522 JN0-522 JN0-522 JN0-522
NO.7 Your VPN tunnel does not pass traffic. You run the get ike cookie command and discover that there is no
cookie. Which two should be verified? (Choose two.)
A.routes
B.Phase 1 configuration options
C.Phase 2 configuration options
D.selected quick mode encryption algorithms
Answer:A B
Juniper prüfungsunterlagen JN0-522 JN0-522 JN0-522
NO.8 Click the Exhibit button. In the exhibit, if host A initiates a Web browsing session with host D, and the
E0/1 interface of the SSG 20 is in NAT mode, what will be the source address of the packet arriving at
host D?
A.10.1.1.1
B.10.1.10.5
C.143.45.56.1
D.143.45.56.254
Answer:C
Juniper JN0-522 originale fragen JN0-522 JN0-522
NO.9 Click the Exhibit button. In the exhibit, which two forms of address translation would have generated
the output shown? (Choose two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer:B C
Juniper testantworten JN0-522 exam fragen JN0-522 dumps JN0-522
NO.10 Click the Exhibit button. In the exhibit, what is the correct command to configure a default route on the
SSG 20?
A.set route 0.0.0.0/0 vrouter untrust
B.set route 0.0.0.0/0 interface e0/4 gateway 143.45.56.254
C.set route 0.0.0.0/0 interface e0/4 next-hop 143.45.56.254
D.set route 0.0.0.0/0 interface 143.45.56.1 gate 143.45.56.254
Answer:B
Juniper zertifizierungsantworten JN0-522 prüfungsunterlagen JN0-522 echte fragen
NO.11 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer:D
Juniper JN0-522 JN0-522 JN0-522
NO.12 Which ScreenOS CLI policy statement keyword would enable a policy only during specified times, days,
and/or dates?
A.at
B.calendar
C.schedule
D.scheduler
Answer:C
Juniper JN0-522 JN0-522 prüfungsfrage JN0-522 JN0-522
NO.13 Click the Exhibit button. In the exhibit, which routing command would allow host A to communicate with
host C? (Note: Assume a route from the SSG 20 to host A's subnet already exists.)
A.set route 0.0.0.0/0 int e0/3 gateway 177.11.56.254
B.set route 1.1.70.0 interface e0/3 gateway 177.11.56.254
C.configure route 1.1.70.0/24 gateway 177.11.56.254 int e0/3
D.set route 1.1.70.0/24 interface e0/3 gateway 177.11.56.254
Answer:D
Juniper JN0-522 JN0-522
NO.14 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer:A
Juniper echte fragen JN0-522 echte fragen JN0-522
NO.15 You enter the following command: set int e0/8 mip 1.1.8.32 host 10.1.10.32 netmask 255.255.255.255
How many MIP address translations have you just configured?
A.1
B.8
C.128
D.256
Answer:A
Juniper exam fragen JN0-522 zertifizierungsfragen JN0-522 zertifizierungsantworten JN0-522 prüfung
NO.16 Which ScreenOS CLI command would be useful for troubleshooting a policy deny?
A.get flow debug
B.debug flow basic
C.exec flow analysis
D.debug session basic
Answer:B
Juniper dumps JN0-522 JN0-522 JN0-522 JN0-522
NO.17 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer:A B
Juniper dumps JN0-522 JN0-522 exam fragen
NO.18 Assuming factory default settings, which statement describes the minimum requirements for WebUI
management access to the SSG 5?
A.Connect a PC addressed on the 192.168.1.0 subnet to any interface, open a browser and access
192.168.1.1.
B.Terminate the bootup sequence from the console device, open a browser on the console device and
access 192.168.1.1.
C.Connect a PC addressed on the 192.168.1.0 subnet, to the highest numbered interface and open a
browser and access 192.168.1.1.
D.Using the CLI, define an IP address on a physical interface, connect a PC to the interface and open a
browser to the interface address.
Answer:C
Juniper JN0-522 JN0-522
NO.19 Click the Exhibit button. Traffic from the Internet to the partner servers must use a VIP. In the exhibit,
what is true about the configuration of this feature?
A.You cannot use a VIP in this environment.
B.The VIP can be configured on the e0/4 interface.
C.The VIP can be configured in the Corporate or Internet zone using a different subnet than the physical
interface.
D.The VIP will work only if the destination ports in the incoming packet headers are mapped to the same
ports in the Corporate zone.
Answer:A
Juniper JN0-522 JN0-522 zertifizierungsfragen JN0-522
NO.20 Click the Exhibit button. In the exhibit, what is the correct address book entry for host C?
A.set address C 1.1.70.250/32
B.set address Partner C 1.1.70.250
C.set address Partner 1.1.70.250/32
D.set address Partner C 1.1.70.250/32
Answer:D
Juniper JN0-522 JN0-522 zertifizierung JN0-522 prüfungsunterlagen
Pass4Test bietet Ihnen die neusten 70-342 exam Unterlagen und 00M-624 pdf Fragen & Antworten mit hoher Qualität. Unser VCP-510 zertifizierung und 646-048 prüfung Lernführung können Ihnen hilfen, die aktuellen Prüfungen zu bestehen. Hochqualitative 70-460 dumps Training Unterlagen können Ihnen gewährleisten, leichter und schneller, diese Prüfung zu bestehen. Es ist sehr einfach für Sie, die Zertifizierung zu bekommen.
Artikel Link: http://www.pass4test.de/jn0-522.html
没有评论:
发表评论