Die Prüfungsfragen und Antworten von Pass4Test Extreme Networks EW0-200 bieten Ihnen alles, was Sie zur Testvorbereitung brauchen. Für Extreme Networks EW0-200-Prüfung können Sie auch Fragen aus anderen Websites oder Büchern finden. Aber Hauptsache, sie müssen logisch verbindend. Unsere Fragen und Antworten ermöglichen es Ihnen, mühelos die Prüfung zum ersten Mal zu bestehen. Zugleich können Sie auch viele wertvolle Zeit sparen.
Wenn Sie in kurzer Zeit mit weniger Mühe sich ganz effizient auf die Extreme Networks EW0-200 Zertifizierungsprüfung vorbereiten, benutzen Sie doch schnell die Schulungsunterlagen zur Extreme Networks EW0-200 Zertifizierungsprüfung. Sie werden von der Praxis bewährt. Viele Kandidaten haben bewiesen, dass man mit der Hilfe von Pass4Test die Prüfung 100% bestehen können. Mit Pass4Test können Sie Ihr Ziel erreichen und die beste Effekte erzielen.
Exam Code: EW0-200
Prüfungsname: Extreme Networks (Extreme networks associate(ena))
Viele Leute meinen, man braucht viel fachliche IT-Kenntnisse, um die schwierigen IT-Zertifizierungsprüfung zu bestehen. Nur diejenigen, die umfassende IT-Kenntnisse besitzen, sind qualifiziert dazu, sich an der Prüfung zu beteiligen. Jetzt gibt es viele Methoden, die Ihre unausreichenden Fachkenntnisse wettmachen. Sie können sogar mit weniger Zeit und Energie als die fachlich gutqualifizierten die Prüfung auch bestehen. Wie es heißt, vieleWege führen nach Rom.
Nach den Forschungen über die Fragen und Antworten in den letzten Jahren sind die Fragen und Antworten zur Extreme Networks EW0-200 Zertifizierungsprüfung von Pass4Test den realen Prüfung sehr ähnlich. Pass4Test verspricht, dass Sie zum ersten Mal die Extreme Networks EW0-200 Zertifizierungsprüfung 100% bestehen können.
EW0-200 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/EW0-200.html
NO.1 Which CLI command would you use to configure the switch to ignore STP for selected VLANs?
A. enable ignore-stp vlan <stpd>
B. enable ignore-bpdu stpd <stpd> vlan <vlan>
C. enable ignore-bpdu stpd <stpd>
D. enable ignore-stp vlan <vlan>
Answer: D
Extreme Networks testantworten EW0-200 EW0-200 EW0-200
NO.2 Which CLI command would you use to create a default route with a metric of 5 and a gateway of
10.0.0.1?
A. CONFIG IPROUTE ADD DEFAULT 10.0.0.1 5
B. CONFIG IPROUTE ADD DEFAULT 5 10.0.0.1
C. CREATE IPROUTE ADD DEFAULT 10.0.0.1 5
D. CREATE IPROUTE ADD DEFAULT 5 10.0.0.1
Answer:A
Extreme Networks EW0-200 dumps EW0-200 EW0-200 dumps
NO.3 Given the following information, select the option that would allow you to change the active
ExtremeWare version to 6.1.9b11 upon reboot.
A. use image primary
B. download config primary
C. use config primary
D. download image primary
Answer:A
Extreme Networks prüfungsfragen EW0-200 EW0-200 EW0-200 dumps
NO.4 Which of the following protocol filter/s is/are predefined in ExtremeWare?
A. OSPF
B. TCP
C. NETBIOS
D. All of these
Answer: C
Extreme Networks zertifizierungsfragen EW0-200 originale fragen EW0-200
NO.5 If you wish to silently drop all traffic destined for IP network 100.219.10.0/24 with a gateway of
10.219.10.1/24 and without receiving any ICMP messages that would otherwise be generated, which CLI
command would you execute?
A. configure iproute delete 100.219.10.0/24 gateway 10.219.10.1
B. configure iproute default 100.219.10.0/24
C. configure iproute add blackhole 100.219.10.0/24 gateway 10.219.10.1
D. configure iproute add blackhole 100.219.10.0/24
Answer: D
Extreme Networks prüfungsunterlagen EW0-200 EW0-200 EW0-200 echte fragen EW0-200 EW0-200
NO.6 A 802.1Q tag is a marker inserted between the source and destination MAC addresses fields of the
Ethernet frame.
A. TRUE
B. FALSE
Answer: B
Extreme Networks prüfungsunterlagen EW0-200 EW0-200 prüfungsunterlagen
NO.7 Which CLI command will you use to change the CLI prompt from the default display to Switch02?
A. CONFIG SNMP SYSLOCATION Switch02
B. CONFIG SNMP SYSNAME Switch02
C. CONFIG CLI PROMPT Switch02
D. CONFIG CLI DISPLAY Switch02
Answer: B
Extreme Networks prüfungsfragen EW0-200 prüfungsunterlagen EW0-200 zertifizierung
NO.8 ExtremeWare, pre-installed on every Extreme Networks ?chipset switch, combines industry standard
protocols to ensure interoperability with legacy switches and routers, QoS for bandwidth management
and traffic prioritization in today networks.
A. TRUE
B. FALSE
Answer:A
Extreme Networks EW0-200 originale fragen EW0-200 zertifizierungsfragen EW0-200 echte fragen
NO.9 Extreme Networks switches build their forwarding database from the incoming packet field information
containing the:
A. Source MAC address.
B. Destination MAC address.
C. Source IP address.
D. Destination IP address.
Answer:A
Extreme Networks testantworten EW0-200 antworten EW0-200 originale fragen EW0-200 antworten
NO.10 What CLI command is used to disable learning of incoming RIP routes on an interface?
A. disable rip learning <VLAN>
B. configure rip rxmode none <VLAN>
C. configure rip interface <VLAN> passive
D. None of these
Answer: B
Extreme Networks EW0-200 testantworten EW0-200 prüfungsfragen EW0-200 originale fragen EW0-200 echte fragen
NO.11 This type of OSPF router has its router interfaces connected into multiple OSPF areas.
A. ASBR.
B. ABR.
C. DR.
D. BDR.
Answer: B
Extreme Networks prüfungsfragen EW0-200 EW0-200 dumps EW0-200
NO.12 An Extreme Switch is shipped with a pre-configured VLAN called DEFAULT that has all switch ports as
tagged members.
A. TRUE
B. FALSE
Answer: B
Extreme Networks dumps EW0-200 EW0-200 dumps EW0-200 prüfungsfragen
NO.13 How would you stop a scheduled configuration download from happening? Use the CLI command:
A. cancel configuration download
B. download configuration cancel
C. configuration download cancel
D. delete configuration download
Answer: B
Extreme Networks EW0-200 EW0-200 EW0-200 EW0-200
NO.14 The CLI console port utilizes a serial cable for physical switch to terminal connection.
A. TRUE
B. FALSE
Answer:A
Extreme Networks dumps EW0-200 EW0-200 EW0-200 originale fragen
NO.15 Which step would you take to configure a VLAN to only allow IP-related traffic?
A. config <vlan> protocol ip
B. config protocol <vlan> ip
C. config ip protocol <vlan>
D. None of these.
Answer:A
Extreme Networks exam fragen EW0-200 EW0-200 antworten EW0-200
NO.16 Which of the following CLI commands would you use to enable ECMP for RIP?
A. enable rip route sharing
B. enable route sharing rip
C. enable iproute sharing
D. None of these, ecmp is not supported by RIP
Answer: D
Extreme Networks prüfungsfragen EW0-200 EW0-200 EW0-200
NO.17 In spanning tree, the designated bridge is the bridge with the:
A. least-cost path to the root bridge
B. highest bridge priority
C. lowest port cost on all ports
D. None of these
Answer:A
Extreme Networks EW0-200 prüfungsfrage EW0-200 EW0-200 dumps
NO.18 The default administrator login name for a new Extreme switch was entered as ADMIN (all caps). This
will allow the administrator access to the CLI.
A. TRUE
B. FALSE
Answer: B
Extreme Networks EW0-200 echte fragen EW0-200 testantworten EW0-200
NO.19 In ExtremeWare, active VLANs that are configured with ports and an IP address and configured to
forward IP and run a routing protocol will have their subnet advertised.
A. TRUE
B. FALSE
Answer:A
Extreme Networks EW0-200 echte fragen EW0-200 EW0-200 EW0-200 antworten
NO.20 Which statement is true? In a PC, the configured default gateway:
A. Is always within the PC IP (sub) network.
B. Is always outside the PC IP (sub) network.
C. Is always behind a router.
D. Can be anywhere.
Answer:A
Extreme Networks EW0-200 exam fragen EW0-200 prüfungsunterlagen EW0-200 prüfungsunterlagen EW0-200
Wenn Sie die Fragen und Antworten zur Extreme Networks EW0-200 Zertifizierungsprüfung kaufen, können Sie nicht nur die Extreme Networks EW0-200 Zertifizierungsprüfung erfolgreich bestehen, sonder einen einjährigen kostenlosen Update-Service genießen. Falls Sie in der Prüfung durchfallen, zahlen wir Ihnen die gesammte Summe zurück. Sie können im Internet teilweise die Fragen und Antworten zur Extreme Networks EW0-200 Zertifizierungsprüfung kostenlos als Probe herunterladen, um die Zuverlässigkeit unserer Produkte zu testen.
没有评论:
发表评论