Die Forschungsmaterialien haben gezeigz, dass es schwierig ist, die Alcatel-Lucent 4A0-103 Zertifizierungsprüfung schwer zu bestehen. Unser Pass4Test hat erfahrungsreiche IT-Experten, die durch harte Arbeit die neuesten Schulungsunterlagen zur Alcatel-Lucent 4A0-103 Zertifizierungsprüfung bearbeitet haben. Unser Pass4Test hat die besten Ressourcen, die Ihnen beim Bestehen der Prüfung helfen. Sie enthalten sowohl Fragen, als auch Antworten. Sie brauchen sich nicht so viel Mühe dafür zu geben und können doch eine hohe Note in der Prüfung bekommen. Wählen Sie doch die Schulungsunterlagen zur Alcatel-Lucent 4A0-103 Zertifizierungsprüfung, die Ihnen sehr helfen können.
Obwohl es auch andere Online-Schulungsressourcen zur Alcatel-Lucent 4A0-103 Zertifizierungsprüfung auf dem Markt gibt, sind die Schulungsunterlagen zur Alcatel-Lucent 4A0-103 Zertifizierungsprüfung von Pass4Test die besten unter ihnen. Weil wir ständig die genauen Materialien zur Alcatel-Lucent 4A0-103 Zertifizierungsprüfung aktualisieren. Außerdem bietet Pass4Test Ihnen einen einjährigen kostenlosen Update-Service. Sie können die neuesten Schulungsunterlagen zur Alcatel-Lucent 4A0-103 Zertifizierungsprüfung bekommen.
Die Fragen zur Alcatel-Lucent 4A0-103-Prüfung von Pass4Test enthalten unbeschränkte Antwortenspeicherungen. So können Sie ganz einfach die Prüfung bestehen. Die Schulungsunterlagen zur Alcatel-Lucent 4A0-103-Prüfung von Pass4Test sind die besten. Mit deren Hilfe, können Sie ganz einfach die Prüfung bestehen und das Zertifikat für Alcatel-Lucent 4A0-103-Prüfung erhalten.
Die Prüfungsfragen und Antworten von Alcatel-Lucent Zertifizierungsprüfungen werden normalerweise von den IT-Spezialisten nach ihren Berufserfahrungen bearbeitet. So ist es auch bei Pass4Test. Die IT-Experten bieten Ihnen Prüfungsfragen und Antworten, mit deren Hilfe Sie die Prügung erfolgreich ablegen können. Die Genauigkeit von unseren Prüfungsfragen und Antworten beträgt 100%. Mit Pass4Test Produkten können Sie ganz leicht die Alcatel-Lucent-Zertifikate bekommen, was Ihnen eine große Beförderung in der IT-Branche ist.
Exam Code: 4A0-103
Prüfungsname: Alcatel-Lucent Multiprotocol Label Switching
Aktulisiert: 2013-09-08
Nummer: 98 Q&As
4A0-103 prüfungsfragen Demo kostenlos downloden: http://www.pass4test.de/4A0-103.html
NO.1 Click on the exhibit button below.
With fast reroute enabled, and given the following:
-The protected LSP path is R1-R2-R3.
-All links are of equal cost.
Which of the following statements is true? (Choose two)
A. Router R1 is the LSP originator and is also a PLR.
B. With one-to-one link or node protection, the detour LSP path is R1-R4-R5-R2-R3.
C. With one-to-one link or node protection, the detour LSP path is R1-R4-R5-R3.
D. If the R2-R3 link fails, router R3 becomes a PLR
E. None of the nodes can be protected with FRR.
Answer: A,C
Alcatel-Lucent prüfungsunterlagen 4A0-103 prüfungsunterlagen 4A0-103 4A0-103
NO.2 Which command can be used to verify the LDP settings for label distribution and retention?
A. show router ldp default
B. show router ldp parameters
C. show router ldp settings
D. show router mpls settings
E. show router mpls label-options
Answer: B
Alcatel-Lucent 4A0-103 4A0-103
NO.3 Click on the exhibit button below.
Given the configuration below, what is the system ID of the destination node?
A. 10.32.1.2
B. 10.1.478
C. 1048.1.1
D. Cannot tell from this configuration
E. 10.1.2.2
Answer: B
Alcatel-Lucent prüfung 4A0-103 exam fragen 4A0-103 prüfung 4A0-103 4A0-103 prüfung
NO.4 Assume that, on the Alcatel-Lucent 7750 SR, an LSP is configured with one-to-one FRR and node
protection. Which of the following statements are FALSE? (Choose two)
A. Each PLR signals a detour LSP that avoids the downstream node. If the downstream node cannot be
avoided, a detour LSP that avoids the downstream link is signaled.
B. The detour LSP can take one or more hops before merging back on the protected LSP.
C. The merge point of the protected LSP must be the next-next-hop node
D. The ingress router will set the local protection desired flag in the session attribute object of the path
message to inform all routers along the protected LSP path to establish detour LSPs.
E. The label recording desired flag must be set in the session attribute object in order for the PLR to know
what label to swap when using the detour LSP.
Answer: C,E
Alcatel-Lucent 4A0-103 4A0-103 4A0-103 prüfungsfragen
NO.5 Click on the exhibit button below.
With fast reroute enabled, and given the following:
-Two protected LSPs with the path R1-R2-R3
-Both LSPs enable facility bypass and link protection.
When router R1 is the PLR, which router becomes the MP?
A. Router R1
B. Router R2
C. Router R3
D. Router R4
E. Router R5
Answer: B
Alcatel-Lucent prüfungsfrage 4A0-103 prüfungsfrage 4A0-103 4A0-103 exam fragen
NO.6 Click on the exhibit button below.
Given the output below, which of the following statements are true? (Choose three)
A. A packet arriving with label 131066 and destined for prefix 10.10.10.243/32 will be forwarded out
interface 1/1/4, with label 131070.
B. LDP ECMP is enabled.
C. The router ¯ s sys t e m add r ess i s 10 . 10 . 10 . 242 / 32 .
D. There are multiple LSPs to reach FEC 10.10.10.244/32.
E. The router cannot receive any unlabeled packets destined for prefix 10.10.10 223/32.
Answer: A,B,D
Alcatel-Lucent 4A0-103 4A0-103
NO.7 What is the common usage of the MPLS EXP bits?
A. Each implementation can use them as they see fit.
B. They are used to carry the Ethertype value.
C. They are used to carry the TTL value.
D. They are used to carry QoS classification.
E. They are used to carry fragmentation flag information
Answer: D
Alcatel-Lucent 4A0-103 dumps 4A0-103 testantworten 4A0-103 testantworten
NO.8 Click on the exhibit button below.
Consider the following:
-Routers R1 and R4 are in Area 1.
-Routers R4 and R5 in Area 0.
-Routers R5 and R3 are in Area 2.
To support LDP-over-RSVP tunnels between routers R1 and R3 over path R1-R4-R5-R3, with which
routers will router R5 require targeted sessions? (Choose two)
A. Router R1
B. Router R4
C. Router R2
D. Router R3
Answer: B,D
Alcatel-Lucent prüfung 4A0-103 4A0-103 exam fragen 4A0-103 echte fragen
NO.9 Which of the following message types does RSVP use to set up an LSP? (Choose two)
A. Path message
B. iLER message
C. Resv message
D. LSP setup call request
E. eLER message
Answer: A,C
Alcatel-Lucent 4A0-103 4A0-103 4A0-103 dumps
NO.10 Click on the exhibit button below.
Assuming that LSP R1-R2-R3 requests the default fast reroute configuration, which router becomes a
DMP for the detour tunnels?
A. Router R1
B. Router R2
C. Router R3
D. Router R4
E. Router R5
Answer: E
Alcatel-Lucent 4A0-103 dumps 4A0-103 4A0-103 4A0-103
NO.11 Router R3 signals an LSP, reserving 1Gbps bandwidth on a 10Gbps link. RSVP configuration limits
reservable bandwidth to 20 percent on the egress interface. Which of the following statements is true?
A. The egress RSVP interface has 80 percent bandwidth unreserved.
B. LSPs can reserve an additional 9.9 Gbps bandwidth on this RSVP interface.
C. The head end reserves 100Mbps for the LSP
D. The egress RSVP interface has 1 Gbps bandwidth unreserved.
Answer: D
Alcatel-Lucent dumps 4A0-103 4A0-103 4A0-103 prüfungsfrage
NO.12 During node protection signaling, the PLR knows the address of the MP from which of the following
methods?
A. The PLR issues a RSVP path message to the destination router to request the address of the MP.
B. The PLR learns the address of the MP from the ERO.
C. The PLR learns the address of the MP from the RRO
D. The PLR learns the address of the MP from the targeted RSVP hello message.
E. The PLR does not need to know the address of the MP.
Answer: C
Alcatel-Lucent 4A0-103 4A0-103 4A0-103
NO.13 What is the significance of receiving a packet with the bottom MPLS label S bit set to 1?
A. It results in forwarding based on the next packet header.
B. It indicates that the label is the bottom of the MPLS label stack.
C. It indicates that the label is the top of the MPLS label stack.
D. Any LSR that receives an S bit set to 1 must discard the packet.
Answer: B
Alcatel-Lucent echte fragen 4A0-103 prüfungsunterlagen 4A0-103 4A0-103 prüfungsunterlagen 4A0-103 originale fragen
NO.14 Which of the following statements best describe MPLS fast reroute characteristics? (Choose two)
A. Fast reroute requires you to manually define detour paths.
B. Fast reroute provides path protection close to the failure point
C. Fast reroute performs automatic path calculation and signaling.
D. Fast reroute protects both primary and secondary paths.
Answer: B,C
Alcatel-Lucent antworten 4A0-103 4A0-103 4A0-103 prüfungsfrage 4A0-103 prüfungsfrage
NO.15 Which of the following is defined by the following statement? All label mappings received from all peer
LSRs are saved.
A. Conservative label retention
B. Liberal label retention.
C. Downstream on demand.
D. Downstream unsolicited.
Answer: B
Alcatel-Lucent exam fragen 4A0-103 4A0-103 4A0-103 exam fragen 4A0-103
NO.16 Which of the following indicates the path over which an LSP's tail end router will return an RSVP RESV
message?
A. The IGP FIB.
B. The Reservation State Block (RSB)
C. The Path State Block (PSB)
D. The opaque database.
Answer: C
Alcatel-Lucent exam fragen 4A0-103 4A0-103 antworten 4A0-103
NO.17 In MPLS, labels are distributed in the opposite direction of the data flow.
A. TRUE
B. FALSE
Answer: A
Alcatel-Lucent zertifizierungsfragen 4A0-103 echte fragen 4A0-103 4A0-103 originale fragen
NO.18 Which of the following statements best describes downstream unsolicited label distribution?
A. An LER may answer requests for label mappings immediately, without waiting for a label mapping from
the next-hop.
B. An LER may advertise label mappings to all peers for which it might be a next-hop for a given FEC.
C. An LER propagates a label mapping downstream for a FEC. only if it has a label mapping for the FEC
next-hop.
D. An LER will only distribute a label for a FEC when it has been requested to do so.
Answer: B
Alcatel-Lucent 4A0-103 4A0-103 zertifizierungsantworten 4A0-103 zertifizierungsfragen
NO.19 You wish to advertise LDP labels for all local networks; which is the most effective policy statement to
use?
A. from prefix-list direct
B. match local
C. from protocol direct
D. match protocol direct
E. from protocol local
Answer: C
Alcatel-Lucent 4A0-103 testantworten 4A0-103 prüfung
NO.20 Which of the following statements regarding LSP path configuration are true? (Choose three)
A. The path must include at least one hop.
B. The path may be used multiple times in a single LSP.
C. The path may comprise loose hop entries only.
D. The path must define the LSP's tail end.
E. The path may be used for multiple LSPs.
Answer: C,E
Alcatel-Lucent prüfungsunterlagen 4A0-103 4A0-103 testantworten 4A0-103 prüfungsfrage
Das Leben ist mit den Wahlen gefüllt. Wahl kann nicht unbedingt Ihnen das absolute Glück bringen, aber sie kann Ihnen viele Chancen bringen. Wenn Sie die Chance verpasst haben, könnnen Sie nur bereuen. Die Schulungsunterlagen zur Alcatel-Lucent 4A0-103-Prüfung von Pass4Test sind die Grundbedarfsbedürfnisse für jeden Kandidaten. Mit ihr können Sie alle Probleme lösen. Die Schulungsunterlagen zur Alcatel-Lucent 4A0-103-Prüfung von Pass4Test sind umfassend und zielgerichtet, am schnellsten aktualisiert und die vollständigst. Mit Pass4Test brauchen Sie sich nicht mehr um die IT-Zertifizierungsprüfung befürchten. Sie werden alle Prüfungen ganz einfach bestehen.
没有评论:
发表评论